Jb-lighting Licon 1X Manuel d'utilisateur télécharger pdf (Page 11)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0

- 11 -

2. Configuration (CONFIG)

In order to operate the Licon 1X properly, all devices you wish to have access to must be configured in

the setup first. For this reason, a comprehensive library is made available to you, from which you can

copy setups of the most prevalent parameters into the CONFIG menu. Switch the Licon 1X on and press

the softkey CONFIG to enter the configuration menu. The following display is shown:

2.1 L-USER / Configuring a fixture

If you will use fixtures, the data of which are not yet stored in the library, you have to configure your

fixtures first.

Enter the main menu and press the softkey CONFIG and afterwards the softkey L-USER.

The following display is shown:

With the left encoder wheel cou can select up to 20 different L-User fixture parameters.

Now consecutively enter data of the fixtures. Activate the corresponding parameters with the softkeys

arranged to the right and left of the display. When the field is displayed inverted, you can enter data with

the double-assigned keys of the following sections: CUES, CHASES and SEQUENCES.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 128 129

Pas de commentaire

Jb-lighting Licon 1X Manuel d'utilisateur Page 11