Jb-lighting Licon 1X Manuel d'utilisateur télécharger pdf (Page 49)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0

- 49 -

9. Freeze function

The freeze function is used to lock fixture parameters.

The Freeze key is located in the Fixture Selection block in the middle

of the left column.

All parameters can be locked by the freeze function. Freeze means,

that a parameter remains unchanged, when another cue, chase or

sequence is activated (the freeze function must have been entered

previously for this parameter).

However, it is always possible to overwrite features, to which the

freeze function was assigned, with the help of presets.

9.1 Entering the freeze function

Activation of the freeze function is not possible in the main menu.

Thus press any key of the Feature Selection section. Then activate the fixtures, to which the freeze

function should be assigned. Press and hold the Freeze key and simultaneously press the feature key of

the desired parameter. This function will now be frozen. The storage matrix appears and the frozen

features are marked with a dark square.

Example: Freeze function activated for Gobo1:

1. 2. 3. 4.

You can assign the freeze function to each feature available by newly defining the fixture selection and

pressing the Freeze key once more in combination with the desired Feature Selection key.

9.2 Deleting the freeze function

You can delete the freeze function for individual or all parameters.

9.2.1 Deleting the freeze function for all parameters

Activate all fixtures (LED must be lit).

Press the Freeze key and simultaneously the Clear key in the Feature Selection block.

On the display, the black squares disappear again from the storage matrix.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 128 129

Pas de commentaire

Jb-lighting Licon 1X Manuel d'utilisateur Page 49