Jb-lighting Licon 1X Manuel d'utilisateur Page 34
- Page / 129
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 34 -
5. Programming aids for Pan and Tilt values
Programming aids for Pan and Tilt values are functions that allow simple and quick programming of
complex sequences. This chapter deals on the one hand with the fan function (Fixture Selection Pan/Tilt)
and on the other hand with preprogrammed moving patterns (Fixture Selection Moving Patterns).
Sequences programmed in these two parameter sections can be stored as presets.
5.1 Fan function
The fan function assigns different deflection angles to a group of fixtures. This will result in fan-shaped
and wavelike cues.
Fan-shaped cues are achieved, when a deflection angle is entered in the Pan section. Wavelike cues are
achieved, when a deflection angle is entered in the Tilt section.
To simplify matters, the following examples are always based on a neutral position of the fixtures in the
Tilt section (50% or DMX value 127). The illustrations will indicate this neutral position always as a line
(as orientation for the user).
Press the Pan/Tilt key in the Feature Selection section twice to activate the fan function. The following
display is shown:
The functions listed below are available:
P-LIN: Linear deflection in the Pan section
P-SIN1: Sine function in the Pan section
P-SIN2: Sine function in the Pan section
P-SIN3: Sine function in the Pan section
P-ABS: Function with absolute values in the Pan
section
P-SYM: Symmetrical deflection in the Pan section
P-INV: Inverse function in the Pan section based on
the neutral position
T-INV: Inverse function in the Tilt section based on
the neutral position
T-SYM: Symmetrical deflection in the Tilt section
T-ABS: Function with absolute valules in the Tilt section
T-SIN3: Sine function in the Tilt section
T-SIN2: Sine function in the Tilt section
T-SIN1: Sine function in the Tilt section
T-LIN: Linear deflection in the Tilt section
5.1.1 Entering the fan function
The following examples will explain the different parameters
on the basis of values entered in the Tilt section.
In order to enter the fan function, press the Pan/Tilt key
twice.
The display as shown on the left appears.
Activate the desired fixtures. Be careful to work with fixture
groups, i.e. either the fixtures of the back truss or of the front
truss or those placed on the floor. If you activate all fixtures
for this function and do not pay attention to the way they
have to be arranged (in line), then no beautiful fan or wave
will result.
Our examples and the respective graphs shown below will always refer to 8 fixtures that are mounted in
one line.
- User manual 1
- - 2 2
- Foreword 3
- General remarks 4
- Table of contents 5
- 1. First steps 10
- 2. Configuration (CONFIG) 11
- 2.5 P-COPY / Copying presets 17
- 2.10 The MIDI-function 21
- 3.2 Fixture groups 28
- 3.3 The Highlight/Group key 30
- 4. Presets 32
- 4.3 Recalling presets 33
- 4.4 Fading presets 33
- 5.1 Fan function 34
- 7. Editing cues 44
- + + + 45
- 7.4 Editing the name 46
- 7.8 Changing the fade time 47
- 7.9 Changing the trigpoint 47
- 9. Freeze function 49
- + 51
- 13.5 Changing direction 73
- 13.6 The Restart function 73
- 13.7 The Sync function 73
- 13.8 The Sound function 73
- 14.1 The LINK F function 75
- 14.2 The SINGLE function 75
- 14.3 The FLASH function 75
- 14.4 The NAME function 75
- 14.5 The MODIFY function 76
- 14.6 The TRACE function 76
- 14.7 The R-LINK function 76
- 14.8 The S-GROUP function 76
- 15. Sequences 77
- 15.2 The NAME function 79
- 15.3 The SINGLE function 79
- 15.4 The LINK F function 79
- 15.5 Entering runtimes 79
- 15.12 The BLOCK function 81
- 15.13 The LINK function 81
- 15.14 The RENUM function 81
- 16. Editing sequences 82
- 17. Working with sequences 84
- 17.3 The ENABLE key 85
- 18.1 Direct access 87
- 18.2 The ENCODE mode 88
- 18.3 The BLOCK mode 88
- 18.4 The HILITE mode 89
- 18.5 The PAROUT mode 89
- 19. The LIST function 96
- 20. Storing data (BACKUP) 98
- 20.3. The directory (DIR) 99
- 20.4 Loading data (LOAD) 99
- 20.5 Deleting a file 101
- 21. The Tool section 102
- 21.3 The CD-player (CD) 103
- 21.5 The INFO function 104
- 22.7 Playing a timeline show 114
- 23. Trackball 115
- 24.2 Updating the Licon 1X 117
- 25.1 Deleting all data 118
- 25.2 Deleting Config data 118
- 25.7 Deleting MIDI data 120
- 26.1 AUX CONTROLLERS 121
- 26.3 Display 121
- 26.4 FEATURE SELECTION 122
- 26.5 COMBI 122
- 26.6 PAR 122
- 26.7 CUES keypad 123
- 26.8 PAGE / BANK 123
- 26.9 CHASES 123
- 26.10 SEQUENCES 124
- 26.12 FADE-MODE 124
- 26.13 PAR faders 125
- 26.14 FIXTURE faders 125
- 26.15 CHASE-CONTROL 126
- 26.16 SEQUENCE-CONTROL 126
- - 127 127
- 28. LICON 1X for hire 128
- 29. LICON 1X Customer List 129
Produits connexes et manuels pour Éclairage Jb-lighting Licon 1X
(31 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.496 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels